Call
+91 9930108105
Address
Sanghvi Galaxy, Shop No.2, Khetwadi
10th Lane, Mumbai-400004, India
Unbroken grain flow through head and shank.
Fatigue-friendly roots on every A2-80 thread.
Class-80 stress checked on finished bolts.
Grade, class and maker stamp per ISO 3506-1.
Heat number follows each box to the MTC.
Class-80 stainless fastening includes in-house testing and export papers. Khetwadi works cold heads stainless fasteners since 2021. Every A2-80 lot ships with chemistry and proof-stress data. We're India's single-window A2-80 bolts manufacturer. Heading, rolling and inspection happen under one roof. This is why buyers list us among the trusted A2-80 Bolts manufacturer in india for repeat orders.
Established 2021
Manifest Alloys, Mumbai
ISO 9001:2015
Certified quality system
GST Registered
Verified business registration
Udyam (MSME)
Ministry of MSME registered
Import-Export Code
DGFT-issued IEC on record
Own Fastener Shop
Heading & rolling under one roof
Pan-India Delivery
Dispatch across the country
Flexible Payments
Multiple settlement options
High-tensile stainless bolting closes the gap to carbon steel. A2-80 combines 304-family corrosion resistance with 800 MPa tensile grade. Strength comes from controlled cold working, not heat treatment. ISO 3506-1 sets the chemistry, proof stress and marking rules. Property class 80 covers thread diameters up to M24. Larger diameters are made to agreed values on request. Every bolt head carries the A2-80 stamp and our mark
One works handles heading, thread rolling, testing and export packing. We head hex bolts, screws, studs and socket patterns in-house. Threads roll after cold working, keeping roots compacted and fatigue-safe. Batch testing covers tensile strength, proof stress and hardness. Each consignment ships with a standard EN 10204 3.1 certificate. Witnessed 3.2 documentation is arranged for project orders on request. Buyers across the Gulf, Africa and Americas restock through us. Domestic lots reach Pune, Chennai and Ahmedabad within days
The details inspectors look for after the headline grade and strength are already ticked.
Each pattern ships thread-rolled, batch-tested and stamped with its property class.










A2-80 Bolts Manufacturer In Mumbai - Cold Heading Lines Running Since 2021
Mail your size-wise schedule and the works desk confirms grade, quantity and dispatch slot in a single reply.
Chromium builds the passive film; nickel keeps it austenitic. ISO 3506-1 Table 1 sets these limits for every A2 melt, balance iron
Identical A2 chemistry, different degrees of cold work. The heavier reduction behind class 80 lifts the minimum proof stress from 450 to 600 MPa, trading a little ductility for it.
Minimum values from Table 2 of the standard, tested on finished bolts rather than machined coupons.
Tensile Strength, Rm
Stress At 0.2% Strain, Rp
Elongation After Fracture
Diameter Coverage, Class 80
Head-Marked A2-80 From M5
A2 80 Bolt Grade Stockist In Mumbai - Racked Bins At Our 2021 Khetwadi Works
Fast movers from M6 to M16 sit boxed and labelled, ready for counter pickup or same-week courier booking. As an active A2-80 Bolts stockist in mumbai, we keep these bins replenished year round.
Buyers searching A2-80 bolt yield strength or torque want one answer: how much preload the joint can hold before yielding
Near-equal strength, very different corrosion life — the real deciding factor for switching material.
A2-80 Bolts Exporter Provides Best Quality Bolts To Durban, South Africa
Mixed-size fastener consignments consolidate at Nhava Sheva with COO and MTC filed before the vessel cut-off.
Name the steel your drawing calls up and we supply the matching A2 chemistry, cold worked to class 80.
Pitting Resistance Equivalent Number ranks stainless grades by chloride resistance; A2 sits below A4 due to zero molybdenum content.
Reference values at K=0.2 friction coefficient, dry unlubricated thread; recalc per VDI 2230 for your surface condition.
| Thread | As (mm²) | Torque Nm (Dry) | Torque Nm (Lubricated) |
|---|---|---|---|
| M6 | 20.1 | 9.5 | 7.1 |
| M8 | 36.6 | 23 | 17 |
| M10 | 58.0 | 46 | 35 |
| M12 | 84.3 | 80 | 60 |
| M16 | 157 | 195 | 146 |
| M20 | 245 | 380 | 285 |
Values are indicative; confirm against your joint's clamp-load calculation before torquing to spec.
Austenitic steel cannot be strengthened by quenching, so class-80 strength is built mechanically, one reduction at a time.
Certified A2 Wire
Mill-tested coil, chemistry on record
Draw To Size
Diameter reduction strain-hardens the wire
Cold Head The Blank
Head forms without cutting the grain
Roll The Thread
Compressed roots resist fatigue cracking
Prove The Class
Tensile & 0.2% stress verified per lot
Austenitic threads self-weld under friction and speed; four habits stop seizure before it starts.
Use Anti-Seize
Nickel or copper paste on threads before assembly
Run Slow
Low RPM tightening cuts frictional heat build-up
Avoid Re-Torque Cycles
Repeated tighten-loosen worsens micro-welding risk
Mix Nut Material
Pair A2 bolt with a coated or dissimilar-grade nut
Order to ISO or DIN patterns, but check one detail: across-flats widths differ between the two systems on three popular sizes.
Partially threaded ISO 4014 and fully threaded ISO 4017, the default call-outs on new international drawings.
Older plants still spare-part to DIN head widths; we stock both so spanner sizes on site never mismatch.
Cylindrical-head screws with internal hex drive for counterbored machine and equipment assembly.
Metre lengths and cut studs, full thread end to end, matched with ISO 3506-2 nuts on the same certificate.
| Thread | Coarse Pitch (mm) | ISO 4014/4017 AF (mm) | DIN 931/933 AF (mm) |
|---|---|---|---|
| M6 | 1.0 | 10 | 10 |
| M8 | 1.25 | 13 | 13 |
| M10 | 1.5 | 16 | 17 |
| M12 | 1.75 | 18 | 19 |
| M14 | 2.0 | 21 | 22 |
| M16 | 2.0 | 24 | 24 |
| M20 | 2.5 | 30 | 30 |
| M24 | 3.0 | 36 | 36 |
AF is the hexagon width across flats. Only M10, M12 and M14 differ between ISO and DIN heads - a mixed shipment means two spanners on site, so state the pattern on your PO.
Approximate weights for ISO 4017 full-thread hex bolts at 50mm length; useful for freight and costing estimates.
| Thread | Length (mm) | Weight/100 pcs (kg) |
|---|---|---|
| M6 | 50 | 0.65 |
| M8 | 50 | 1.35 |
| M10 | 50 | 2.55 |
| M12 | 50 | 4.10 |
| M16 | 50 | 8.60 |
| M20 | 50 | 15.80 |
Weights vary with length and head style; exact figures confirmed against your size list before dispatch.
Wherever a joint needs stainless corrosion life and near-carbon-steel preload in the same fastener.
Per-kilo wire cost, diameter, head style, finish and testing scope steer the number, so email your bolt schedule for a works-gate Mumbai rate. As an A2-80 Bolts stockist in india, we also hold ready sizes for quick pickup between production runs.
Contact for Best PriceClocks start ticking once the works desk confirms your order.
M6 to M16 stock ships within the week; cold-headed batches take 10–15 days.
Cartons move on weekly Nhava Sheva sailings; transit time depends on your port.
For urgent line-stops, studs and screws fly out with airway bills shared on uplift.
Gulf ports land fastest, African ports follow, North America takes about a month.
Ocean windows are estimates, not fixed promises - bookings confirm the firm sailing. Within India, road courier keeps delivery to just a few days. This quick turnaround is why buyers rely on us as an A2-80 Bolts supplier in india for both routine and urgent schedules.
Customs classification and paperwork buyers ask for before releasing a purchase order.
Certified cartons clear customs across four continents with one paperwork pack. Trading desks and fabricators restock through us as an A2-80 fasteners exporter. Gulf buyers often club bolts, studs and nuts on one bill of lading. This reach is what makes us a preferred A2-80 Bolts exporter for repeat international orders.
A2-80 Bolts Supplier In India Backing Every Lot With EN 10204 3.1 Papers
Canadian distributors receive size-labelled cartons whose heat numbers tie straight back to the certificate in the shipping folder. Local buyers reach the same desk, since our base as an A2-80 Bolts supplier in mumbai keeps dispatch quick for domestic orders too.
A2 is the austenitic stainless grade under ISO 3506-1; 80 marks 800 MPa minimum tensile strength from cold working.
Same A2 chemistry, but A2-70 reaches 700 MPa tensile / 450 MPa proof stress, while A2-80 reaches 800 MPa / 600 MPa with slightly lower elongation.
It matches the 304 family: AISI 304, UNS S30400, EN 1.4301, BS 304S31 and JIS SUS304.
ISO 3506-1 sets a minimum 0.2% proof stress of 600 MPa for class 80.
A4 adds molybdenum for better pitting resistance in marine use; class 80 mechanical values stay the same.
Class 80 covers up to M24; larger sizes are quoted per drawing on agreed values.
Calculate per VDI 2230 based on friction; the 600 MPa proof stress allows a one-third higher preload than A2-70.
Price depends on wire cost, diameter, head style, finish and testing scope - confirmed against your size list.
Same geometry - but use a nut of matching or higher class certified to ISO 3506-2.