• An ISO 9001:2015 Certified Company

ASTM A193 B8M Bolts

ASTM A193 B8M Bolts Quick Overview

  • MTC CertificateEN 10204 3.1 & 3.2
  • ChemistryCr 16–18%, Ni 10–14%, Mo 2–3%
  • Size Range1/4″ to 3″; M6 to M72
  • GradeB8M (Type 316, UNS S31600)
  • Mating NutsASTM A194 Grade 8M heavy hex
  • Tensile & Yield (Class 1)515 MPa min; 205 MPa min
  • StandardASTM A193 / ASME SA-193
  • FinishPlain or passivated; PTFE on request
  • ConditionClass 1 solution treated; Class 2 strain hardened
  • Hardness (Class 1)223 HBW / 96 HRB max
  • ThreadUNC to 1″, 8UN above; UNF on request
  • FormsStuds, heavy hex bolts, screws & rods
01

Mo Checked Per Heat

2–3 % molybdenum confirmed before bar is cut.

02

Class Stated On Every Box

Class 1 and Class 2 lots never share a carton.

03

8UN Above One Inch

Flange-ready pitch unless your PO asks for UNC.

04

Stud + 2 Nuts Kitted

A194 8M nuts bagged with each flange stud.

05

Hardness Logged By Lot

HRB or HRC readings printed on the MTC.

ASTM A193 B8M Bolts  

What Makes Buyers Trust Manifest Alloys for A193 B8M Bolts?

Mumbai workshop delivering acid resistant hardware for demanding piping duty. Sourcing departments trust ASTM A193 B8M Bolts manufacturer in India. Plant engineers expect verified alloy content, never guesswork. Each melt gets chemistry testing prior to sawing. Annealing, cold working plus thread rolling happen in-house. Milder plus harder categories ship with individual mill paperwork.

Payment Choice

LC, TT or advance terms

In-House Threading

Cutting, rolling & marking

Since 2021

Manifest Alloys, Khetwadi

Udyam (MSME)

Government MSME listing

India-Wide Dispatch

Road & courier to every state

ISO 9001:2015

Audited quality management

IEC Holder

DGFT export licence active

GST Registered

Tax-compliant invoicing

Genuine SA 193 B8m Class 2 Stud Bolts Manufacturer In India With Torque Chart Reference

ASTM A193 B8M covers 316 stainless studs and bolts. Molybdenum content improves chloride pitting resistance noticeably. A193 B8M Class 1 is solution treated only. It guarantees 75 ksi tensile across all sizes. A193 B8M Class 2 adds strain hardening. Tensile rises to 110 ksi at three quarter inch. Larger diameters see that strength decline. SA 193 Gr B8M applies to code stamped vessels. Always state the class on your order.

Our team converts approved 316 bar into B8M Stud Bolts. ASTM A193 Grade B8M Heavy Hex Bolt sizes leave regularly. A193 GR B8M Flange Bolts follow unified thread fits. Coarse pitch suits diameters through one inch. Eight pitch series covers larger ones. Every batch passes tensile and hardness checks. Paperwork follows EN 10204 3.1 as standard. Inspector witnessed 3.2 is available on request. Gulf and African plants reorder from us. Search ASTM A193 B8M Bolt Suppliers In India for documented supply. Local orders reach Chennai and Kolkata within days.

Specification

ASTM A193 B8M Bolt Specification

Inspectors verify extra details against your order, and ASTM A193 B8M Bolts Supplier in India delivers.

SA 193 B8M Class 2 Stud Bolts General Requirements

  • Common clauses per ASTM A962
  • Chamfered (pointed) ends on bolts & studs
  • No intentional Bi, Se, Te or Pb

A193 B8M Class 1 Hex Bolt and Screw Dimensional Standards

  • Heavy hex bolts: ASME B18.2.1
  • Threaded studs: ASME B18.31.2
  • Metric heads to ISO 4014 / 4017 on request

ASME SA193 Grade B8M Eye Bolts Galling Control

  • Class 2 cold work lowers galling tendency
  • Anti-seize on threads & nut face
  • Slow, continuous tightening advised

Grade B8M Stud Bolt Testing Scope

  • Tensile & hardness on every class lot
  • PMI spot check for Mo content
  • ASTM A262 Practice E IGC on request

A193 Gr 8M Heavy Hex Bolt Heat-Treatment Records

  • Furnace chart kept per treatment batch
  • Cooling record logged against heat number
  • Class 1A treated in finished condition

A193 Grade B8M Square Bolts Surface Options

  • Plain bright, as threaded
  • Passivated on order
  • PTFE / Xylan coating on order

SA 193 Grade B8M Hex Bolts Export Packing

  • Fumigated wooden cases for sea freight
  • Diameter & length printed per bag
  • Heat and class on every case label

ASTM A 193 Gr B8M Made To Drawing

  • Stud lengths cut to flange schedule
  • Reduced-shank & tap-end studs
  • Sample pieces cleared before bulk

A193 Gr B8M Flange Bolts Marking

  • B8M grade symbol stamped on each piece
  • Class 2 marked B8MSH with underline
  • Maker's mark on head or stud end
Types

Various Types Of SA 193 Gr B8M

Choose your fastener shape and strength grade, and ASTM A193 B8M Bolts Supplier in Mumbai ships verified stock.

SA 193 Grade B8M Hex Bolts
SA 193 Grade B8M Hex Bolts
  • Standard hex head for equipment joints
  • Partial or full thread to drawing
A193 GR B8M Flange Bolts
A193 GR B8M Flange Bolts
  • Sets counted per flange bolt-hole pattern
  • Bagged by line number for site crews
ASTM A193 Grade B8m stainless Steel U Bolts
ASTM A193 Grade B8m stainless Steel U Bolts
  • Bent to pipe OD, legs threaded
  • Holds lines on offshore & jetty racks
ASME SA193 Gr B8M Hex Head Bolt
ASME SA193 Gr B8M Hex Head Bolt
  • Finished hex for equipment joints
  • Supplied with matching A194 8M nuts
Alloy Steel ASTM A193 Gr B8M J Bolt
Alloy Steel ASTM A193 Gr B8M J Bolt
  • Hook-end anchors cast into plinths
  • Leg and hook length to foundation plan
A193 Gr 8M Heavy Hex Bolt
A193 Gr 8M Heavy Hex Bolt
  • Wider head per ASME B18.2.1 heavy series
  • Common on valve bonnets & covers
B8M Grade Stainless Steel Hex Head Bolt
B8M Grade Stainless Steel Hex Head Bolt
  • 316 stainless for chloride-prone service
  • Cut to length, threaded to order
Grade B8M Stud Bolt
Grade B8M Stud Bolt
  • Full-thread studs sized to flange rating
  • Supplied with two A194 8M heavy nuts
ASME SA193 Grade B8M Eye Bolts
ASME SA193 Grade B8M Eye Bolts
  • Lifting points on covers & manways
  • Eye formed, shank threaded UNC

ASTM A193 B8M Bolts Manufacturer In Mumbai Making Molybdenum Stainless Studs With Full Test Reports

Email your project list and expect a costed proposal before the next business day ends.

Request Quote Now

Fetch A193 B8m Class 1 Hex Bolt and Screw For Marine and Chloride Environment Fastening

Applications

SA 193 B8m Class 2 Stud Bolts Applications

Sealed connections in corrosive media suit A193 B8M Bolts, where cheaper alloys fail early.

Chemical & Fertiliser Units

Mild acid and chloride lines.

→
Offshore Platforms & Marine Skids

Topside flanges in salt spray.

→
Pressure Vessels & Heat Exchangers

Channel covers and girth flanges.

→
Pulp, Paper & Power Plant Auxiliaries

Condensate and cooling-water lines.

→
Coastal Refineries & Jetty Piping

Flanges in salt-laden air.

→
Wastewater & Effluent Treatment

Pump and dosing flanges.

→
Pharma, Dairy & Food Process Lines

Washdown zones needing chloride tolerance.

→
Desalination & Water Treatment

Pump, filter and skid flanges.

→
Valve Bonnets & Pipeline Fittings

Body-bonnet studs on 316 valves.

→
Material Equivalent

ASTM A193 Gr B8M Equivalent

Several naming systems point to one molybdenum stainless alloy, so ask ASTM A193 B8M Bolts Stockist in India.

Unified (UNS)
UNS
  • S31600
United States
United States
AISI / ASME
  • Type 316
  • SA193 Gr B8M
Germany
Germany / EN
Werkstoff / EN
  • 1.4401
  • X5CrNiMo17-12-2
United Kingdom
United Kingdom
BS
  • 316S31
Japan
Japan
JIS
  • SUS316
France
France
AFNOR
  • Z7CND17-11-02
Chemical Composition

Chemical Composition Of A193 B8M Class 1 Hex Bolt and Screw

Both strength categories share identical composition, says ASTM A193 B8M Bolts Stockist in Mumbai.

16.0–18.0%
Cr
10.0–14.0%
Ni
2.00–3.00%
Mo
Max 2.00%
Mn
Max 1.00%
Si
Max 0.08%
C
Max 0.045%
P
Max 0.030%
S
Passive film & pitting resistance Austenite stability & residuals

A193 B8M Class 1 Hex Bolt And Screw Torque Values For Flange Tightening

Torque Chart

ASTM A193 B8M Bolt Torque Chart

Bare fasteners seize during tightening, so these figures presume lubricant, as ASTM A193 B8M Bolts Exporter advises.

Size-TPIStress Area (in²)Class 1 (ft-lb / N·m)Class 2 (ft-lb / N·m)
1/2"-130.141921 / 2967 / 91
5/8"-110.226042 / 57134 / 182
3/4"-100.334575 / 102238 / 323
7/8"-90.4617121 / 164323 / 438
1"-80.6057182 / 246485 / 657
1-1/4"-80.9997375 / 508812 / 1101
1-1/2"-81.4918671 / 9101119 / 1517
 
Basis T = K × D × F  |  K = 0.16  |  F = 75% of min yield × stress area

B8M Stud Bolts Stockist In Mumbai Offering Ready Inventory For Urgent Plant Requirements

Popular flange sizes stay cut and paired with matching nuts for immediate collection.

Request Quote Now
Grade Selection

ASTM A193 B8 Bolts VS ASTM A193 B8M Bolts

Pick by coastal exposure, since A 193 B8M alloy content differs while tensile ratings match.

ASTM A193 B8 Bolts SA 193 B8 Material · AISI 304
MolybdenumNot specified
Cr / Ni18–20 / 8–11 %
PREN (calc.)18–20
Class 2 ≤ 3/4"125 / 100 ksi
Suits dry, inland, chloride-free duty
ASTM A193 B8M Bolts SA 193 B8m Material · AISI 316
Molybdenum2.00–3.00 %
Cr / Ni16–18 / 10–14 %
PREN (calc.)22.6–27.9
Class 2 ≤ 3/4"110 / 95 ksi
Suits coastal, splash & process-chloride duty
Price per piece
₹ -- / pc
Price on request
Pricing

ASTM A193 B8M Bolts Price Guide

Cold working adds cost, so the harder category sells higher. Size, length, nuts, coating plus inspection shift totals. Send your dimensions and volume for a quotation. Ready cut studs get separate pricing through ASTM A193 B8M Bolts stockist in india.

Contact for Best Price
Export Coverage

Trade Lanes Carrying Our A193 B8M Bolts

Unified paperwork eases clearance, and repeat orders make us your ASTM A193 B8M Bolts exporter.

Region
South-East Asia
VietnamVietnam SingaporeSingapore PhilippinesPhilippines ThailandThailand IndonesiaIndonesia MalaysiaMalaysia
Region
Gulf & Turkey
TurkeyTurkey Saudi ArabiaSaudi Arabia UAEUAE
Domestic
India
ChennaiChennai RajkotRajkot KolkataKolkata MumbaiMumbai GhaziabadGhaziabad NagpurNagpur BengaluruBengaluru PunePune DelhiDelhi GujaratGujarat AhmedabadAhmedabad
Region
Europe & Oceania
AustraliaAustralia NetherlandsNetherlands ItalyItaly UKUK GermanyGermany
Region
Africa
UgandaUganda South AfricaSouth Africa KenyaKenya
Region
North & South America
MexicoMexico VenezuelaVenezuela USAUSA CanadaCanada
Mechanical Properties

SA 193 B8m Class 2 Stud Bolts Mechanical Properties

Strength limits for A 193 B8M stay uniform in Class 1, while Class 2 shifts with diameter.

655MPa yield

Cl 2, ≤ 3/4" (≤ M20): 760 MPa UTS, 15 % El

550MPa yield

Cl 2, > 3/4–1" (M20–M24): 690 MPa UTS, 20 % El

450MPa yield

Cl 2, > 1–1-1/4" (M24–M30): 655 MPa UTS, 25 % El

345MPa yield

Cl 2, > 1-1/4–1-1/2" (M30–M36): 620 MPa UTS, 30 % El

Identification & Hardware

A193 Grade B8M Square Bolts Identification & Hardware

Site auditors confirm markings, strength category and nut quality before accepting any SA 193 B8M Material delivery.

Class 1 Bolt head
"B8M" + Maker's Mark
  • Grade symbol stamped on the head
  • Our identification mark alongside
Class 2 Bolt head
Underlined Grade Symbol
  • Underline flags the strain-hardened class
  • Keeps Cl2 apart from Cl1 on the rack
Studs End face
One End, 3/8" And Up
  • Grade plus maker mark on one end
  • Maker mark may move to the other end
Nut Mating part
ASTM A194 Grade 8M
  • Heavy hex, 316 chemistry to match
  • Same nut grade for Class 1 and 2
Washer Bearing face
ASTM A240 Type 316
  • Flat washers cut from 316 plate
  • Avoids mixed-metal contact at the joint
Class 1A Variant
Grade B8MA
  • Solution treated in the finished condition
  • Chosen where corrosion state is critical

SA 193 Grade B8M Hex Bolts Exporter Delivering Documented Stainless Fastener Kits To Gulf Buyers

Complete fastener sets ship with unified paperwork, helping consignees clear port formalities without delay.

Request Export Quote
Sizes & Threads

ASME SA193 Grade B8M Eye Bolts Thread Series & Sizes

Pitch changes above a certain diameter, so shoppers pairing nuts casually with A193 bolting often make mistakes.

NC
1" And Smaller
UNC Coarse Series

Standard coarse pitch up to and including one inch diameter, where 1"-8 UNC and 8UN are the same pitch.

Fit Class 2A Std ASME B1.1
8U
Over 1"
8UN Eight-Pitch Series

Eight threads per inch above one inch unless the order states otherwise; UNC is cut only on written request.

TPI 8 Rule ASTM A962
ST
ASME B18.31.2
Continuous Thread Studs

Length is quoted point to point; tell us the flange class and gasket so we cut once.

Ends Chamfered Length To schedule
HH
ASME B18.2.1
Heavy Hex Bolts

Wider across-flats than regular hex, giving a larger bearing face on flange backs.

Head Heavy series Nut A194 8M
DiameterThreadHeavy Hex AF (in)Head Height (in)
1/2"13 UNC7/811/32
5/8"11 UNC1-1/1627/64
3/4"10 UNC1-1/41/2
7/8"9 UNC1-7/1637/64
1"8 UNC1-5/843/64
1-1/8"8UN1-13/163/4
1-1/4"8UN227/32
1-1/2"8UN2-3/81

Grade B8M Stud Bolt Supplier In Mumbai Offering Fully Documented Traceable Stainless Bolting

Each carton label matches your inspection paperwork, letting receiving crews approve incoming stock quickly.

Get Supplier Quote
FAQs

FAQs For ASTM A193 B8M Bolts

01Which sizes are available in A193 B8M Bolts?

B8M Stud Bolts span 1/4 to 3 inch, plus metric.

02What is the ASTM A193 Gr B8M Equivalent material?

Type 316, UNS S31600 and EN 1.4401 match this grade.

03How is A193 B8M Bolts pricing decided?

Class, size, nut kitting, coating and inspection decide the final price.

04How does B8M Class 2 Bolts differ from A193 B8M Class 1?

Class 2 is strain hardened, giving higher tensile and yield strength.

05What does ASTM A193 B8M Bolt Specification cover?

Grade, class, chemistry, mechanical properties, threads, marking and testing requirements.

06Where can I find ASTM A193 B8M Bolt Torque Chart values?

We share torque values with every quotation on request.

07Which nut suits SA 193 B8M Material studs?

ASTM A194 Grade 8M heavy hex nuts pair with them.