Call
+91 9930108105
Address
Sanghvi Galaxy, Shop No.2, Khetwadi
10th Lane, Mumbai-400004, India
What are Copper Nickel 70/30 Fasteners?
These high-strength fasteners, composed of copper and nickel (70 and 30 per cent) with inclusions of iron and manganese, are worth the investment. Copper nickel 70/30 fasteners work extensively in marine industries, but their applications extend to heat exchangers, distiller tubes, chemical processing, and boiler components.
The true-blue superpowers of UNS C71500 screws are evident in polluted and fast-moving seawater (~4.5m/s) – conditions where lesser components often fail.
We supply varieties of fasteners in this durable material: from a cupro nickel 70/30 stud bolt to threaded rods, screws, and washers. All our deliverables undergo complete testing via positive material identification and other procedures to assess the hardness, pitting resistance, and chemical composition
Table of Content
Copper Nickel 70/30 Fasteners Specification
UNS C71500 Bolt and Nut Delivery Schedules
| Country Name | Delivery Time |
|---|---|
| Angola | 15-20 Days |
| Nigeria | |
| Ghana | |
| Madagascar | |
| Kenya |
Cuni 70/30 Stud Bolt Equivalent Grade
| Grade | UNS | Werkstoff Nr. |
|---|---|---|
| 70/30 | C71500 | 2.0882 |
Copper Nickel 70/30 Nuts Mechanical Properties
| Grade | Melting point | Density | Tensilestrength | Elongation | Yieldstrength(0.2%Offset) |
|---|---|---|---|---|---|
| 70/30 | 2260°F | 0.323 lb/in3 at 68°F | 50000 PSi | 30% | 20000PSi |
How does the tensile strength of Copper Nickel 70/30 Fasteners compare to other materials commonly used in fasteners?
In corrosion resistance and tensile strength, they are superior to their 90-10 counterparts (372 to 517 MPa). The mechanical robustness of a UNS C71500 threaded rod is also more than some stainless steel grades and materials like titanium.
70-30 cupro nickel washers provide a good balance of longevity and safety in multifaceted roles. However, fasteners built of Inconel and Incoloy are likelier to show even greater tensile strength (over 800 Mpa). Running a Charpy Impact test is recommended for components operating in stressful environments.
Types of Cupro Nickel 70/30 Fastener
cunifer 70/30 Fasteners
UNS C71500 Screws
Cupro nickel 70/30 hex bolt
Cu-ni 70/30 Studs
Sizes of Cuni 70/30 Bolts
| Size | Types of copper nickel 70/30 bolt | Property class | Standards | Tensile strength |
|---|---|---|---|---|
| M4 to M80 | Copper Nickel 70/30 Hex Head Bolt / Screws | 10.9 | ISO 4017 (fully threaded) ISO 4014 (half threaded) | 1040N / mm2 min |
What makes Copper Nickel 70/30 Fasteners suitable for demanding applications in aerospace, defense, and nuclear industries?
CUNI C71500 nuts are ideal for critical applications like aerospace and nuclear plants. These top-quality fasteners can operate optimally at temperatures as steep as 1038°C or 1900°F.
A DIN 2.0882 anchor bolt frequently works in nuclear power generation, fuel reprocessing, and pickling tanks due to its ability to withstand abrasive agents. In the defense sector, it gets used for sonar equipment, submarine bolts, and propeller shafts.
A CUNI C71500 hex bolt also avoids biofouling, pitting, stress cracking, and impingement. High-velocity waters and turbulence are not a problem for these hardy products. Ease of fabrication and welding is another point in favour of CUNI 70/30 heavy hex bolts.
UNS C71500 Stud Bolt Torque Chart
| Flange | Size | 16 | 1/2 | 1 | 10 | 2 | 1-1/2 | 3 | 4 | 2-1/2 | 3-1/2 | 5 | 24 | 14 | 8 | 12 | 1-1/4 | 18 | 3/4 | 6 | 20 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| B16.5 Cl 150 RF | Torque / Round (ft-lbs) | Dwg/No. (bolts) | 16 | 4 | 4 | 12 | 4 | 4 | 4 | 8 | 4 | 8 | 8 | 20 | 12 | 8 | 12 | 4 | 16 | 4 | 8 | 20 |
| Stud Bolts Tighten Sequence | Bolts Size | 1 | 1/2 | 1/2 | 7/8 | 5/8 | 1/2 | 5/8 | 5/8 | 5/8 | 5/8 | 3/4 | 1-1/4 | 1 | 3/4 | 7/8 | 1/2 | 1-1/8 | 1/2 | 3/4 | 1-1/8 | |
| 1st | 147 | 10 | 15 | 95 | 40 | 20 | 40 | 40 | 40 | 40 | 60 | 300 | 147 | 60 | 95 | 20 | 213 | 13 | 60 | 213 | ||
| 2nd | 294 | 20 | 30 | 190 | 80 | 40 | 80 | 80 | 80 | 80 | 120 | 600 | 294 | 120 | 190 | 40 | 426 | 27 | 120 | 426 | ||
| Final | 490 | 30 | 50 | 320 | 120 | 60 | 120 | 120 | 120 | 120 | 200 | 1,000 | 490 | 200 | 320 | 60 | 710 | 40 | 200 | 710 | ||
| B16.5 Cl 150 FF/ Gaskets | Stud Bolts Tighten Sequence | Bolts Size | 1 | 1/2 | 1/2 | 7/8 | 5/8 | 1/2 | 5/8 | 5/8 | 5/8 | 5/8 | 3/4 | 1-1/4 | 1 | 3/4 | 7/8 | 1/2 | 1-1/8 | 1/2 | 3/4 | 1-1/8 |
| Torque / Round (ft-lbs) | Dwg*/No. | 16 | 4 | 4 | 12 | 4 | 4 | 4 | 8 | 4 | 8 | 8 | 20 | 12 | 8 | 12 | 4 | 16 | 4 | 8 | 20 | |
| 1st | 147 | 20 | 20 | 95 | 40 | 20 | 40 | 40 | 40 | 40 | 60 | 300 | 147 | 60 | 95 | 20 | 213 | 20 | 60 | 213 | ||
| 2nd | 294 | 40 | 40 | 190 | 80 | 40 | 80 | 80 | 80 | 80 | 120 | 600 | 294 | 120 | 190 | 40 | 426 | 40 | 120 | 426 | ||
| Final | 490 | 60 | 60 | 320 | 120 | 60 | 120 | 120 | 120 | 120 | 200 | 1,000 | 490 | 200 | 320 | 60 | 710 | 60 | 200 | 710 |
Cupro Nickel 70/30 Hex Bolts Chemical Composition
| Grade | Mn | Cu | Pb | Fe | Ni | Zn |
|---|---|---|---|---|---|---|
| 70/30 | 1 max | 65.0 min | 0.5 max | 0.4-1.0 | 29-33 | 1 max |
WNR 2.0882 Fasteners Weight Chart
| Lengths | #3 | #2 | #4 | #6 | #5 | #8 | #12 | #10 | 1/4″ | 3/8″ | 5/16″ |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/4 | 0.80 | 0.60 | 1.00 | 1.7 | 1.4 | 2.8 | 5.6 | 4.3 | 8.5 | — | — |
| 3/16 | 0.70 | 0.50 | 0.90 | 1.5 | 1.2 | 2.5 | — | 3.9 | — | — | — |
| 5/16 | 0.90 | 0.60 | 1.20 | 1.9 | 1.5 | 3.1 | 6.1 | 4.6 | 9.1 | — | 16.7 |
| 7/16 | 1.00 | 0.80 | 1.50 | 2.2 | 1.9 | 3.6 | 6.9 | 5.4 | 10.4 | 30.7 | 18.8 |
| 3/8 | 0.90 | 0.70 | 1.30 | 2.1 | 1.7 | 3.4 | 6.5 | 5.0 | 9.8 | 29.2 | 17.7 |
| 1/2 | 1.10 | 0.80 | 1.60 | 2.4 | 2.0 | 3.9 | 7.4 | 5.8 | 11.1 | 32.2 | 19.8 |
| 5/8 | 1.30 | 1.00 | 1.80 | 2.8 | 2.3 | 4.5 | 8.3 | 6.6 | 12.4 | 35.1 | 21.9 |
| 9/16 | 1.20 | 0.90 | 1.70 | 2.6 | 2.2 | 4.2 | 7.8 | 6.2 | 11.7 | 33.6 | 20.9 |
| 1/8 | 0.55 | 0.40 | 0.70 | 1.4 | 1.1 | — | — | — | — | — | — |
| 3/4 | 1.50 | 1.10 | 2.10 | 3.2 | 2.6 | 5.0 | 9.2 | 7.3 | 13.6 | 38.0 | 24.0 |
| 1″ | 1.90 | 1.40 | 2.50 | 3.9 | 3.4 | 6.2 | 11.0 | 8.9 | 16.1 | 44.0 | 28.8 |
| 7/8 | 1.70 | 1.30 | 2.30 | 3.5 | 3.0 | 5.6 | 10.1 | 8.1 | 14.9 | 41.0 | 26.1 |
| 1-1/8″ | 2.00 | 1.50 | 2.80 | 4.3 | 3.8 | 6.7 | 11.9 | 9.6 | 17.4 | 47.0 | 30.2 |
| 1-1/2″ | 2.50 | 1.80 | 3.50 | 5.3 | 4.7 | 8.3 | 14.7 | 11.9 | 21.2 | 55.8 | 36.5 |
| 1-1/4″ | 2.20 | 1.60 | 3.00 | 4.6 | 4.1 | 7.3 | 12.8 | 10.4 | 18.7 | 49.8 | 32.3 |
| 1-3/4″ | 2.90 | 2.10 | 4.00 | 6.1 | 5.3 | 9.4 | 16.5 | 13.5 | 23.7 | 61.7 | 40.7 |
| 2-1/4″ | 3.60 | 2.60 | 5.00 | 7.6 | 6.7 | 11.8 | 20.1 | 16.6 | 28.8 | 73.5 | 19.0 |
| 2″ | 3.30 | 2.40 | 4.50 | 6.8 | 6.0 | 10.6 | 18.3 | 15.0 | 26.2 | 67.6 | 44.8 |
| 2-1/2″ | 3.90 | 2.80 | 5.50 | 8.3 | 7.3 | 12.9 | 22.0 | 18.1 | 31.3 | 79.5 | 53.2 |
| 3″ | 4.70 | 3.40 | 6.50 | 9.8 | 8.6 | 15.0 | 25.6 | 21.2 | 36.4 | 91.3 | 61.5 |
| 2-3/4″ | 4.30 | 3.10 | 6.00 | 9.1 | 7.9 | 13.9 | 23.8 | 19.7 | 33.9 | 85.3 | 57.3 |
American Standards of UNS C71500 Screws
| Screws Type | GRADE | SIZE | ASTM | ISO | ASME |
|---|---|---|---|---|---|
| Socket low head cap screws | 10.9 | M4 to M20 | |||
| Socket head cap screws | 12.9 | M1.6 to M64 | A574M | 4762 | B18.3.1 M |
| Socket head shoulder screws | 012.9 | M6 to M24 | B18.3.3M | ||
| Button head socket screws | 012.9 | M3 to M12 | F835M | 7380 | B18.3.4M |
| Countersunk socket head screws | 012.9 | M3 to M20 | F835M | 10642 | B18.3.5M |
| Flange button head socket screws | 012.9 | M3 to M10 | F835M | ||
| Flat point socket set screws | 45H | M6 to M12 | F912M | 4026 | B18.3.6M |
| Knurled point socket set screws | 45H | M3 to M20 | F912M | 4029 | B18.3.6M |
| Taper pressure plug | – | M8 to M22 | |||
| Cone point socket set screws | 45H | M3 to M12 | F912M | 4027 | B18.3.6M |
| plain point socket set screws | 45H | M3 to M20 | F912M | 4029 | B18.3.6M |
Applications of Cuni 70/30 Threaded Rod