Call
+91 9930108105
Address
Sanghvi Galaxy, Shop No.2, Khetwadi
10th Lane, Mumbai-400004, India
These quick facts cover grades, standards, sizes, strength and dispatch for every duplex fastener order.
Duplex fasteners keep grain flow along the head.
290 HB ceiling checked every lot.
Phase balance kept from mill stock.
Carton label ties back to MTC.
For splash zones and subsea duty.
Certified, export-ready manufacturer
Each registration below is current and can be shared with your vendor approval team.
Established 2021
Khetwadi, Mumbai base
ISO 9001:2015
Audited quality system
GST Registered
Tax-compliant invoicing
Udyam (MSME)
Listed with Ministry of MSME
Import-Export Code
DGFT IEC for direct export
In-House Machine Shop
Threading & inspection on site
Pan-India Delivery
Road courier to every state
Flexible Payments
Several settlement routes
Duplex bolts let you carry the same load with a smaller and lighter fastener. Even when annealed, duplex bar offers more than double the yield strength of 316. This strength comes from its mixed ferrite-austenite structure, not from heat treatment or cold work. Chromium, molybdenum and nitrogen help it resist pitting in salty, chloride-rich plants and platforms. Our duplex stainless steel bolts meet ASTM A1082, with bar traceable to A276 or A479.
As a duplex fasteners manufacturer in India, we machine, thread and inspect lots at Khetwadi. Duplex bolts & nuts leave the shop hardness-checked, PMI-verified and packed against one heat number. Every consignment carries an EN 10204 3.1 certificate, with witnessed 3.2 papers arranged for projects. Buyers in the Gulf, Africa and Canada rely on us for duplex steel fasteners shipments. Domestic lots move quickly to Pune, Chennai, Ahmedabad and Kolkata by trusted road courier. Local buyers use us as a duplex stainless steel bolts supplier in Mumbai for pickups.
Purchase-order technical details
Use these details to write your purchase order, from physical data to packing and marking.
Duplex and super duplex
Pick the duplex or super duplex grade that matches your drawing, then open its page.
Base-grade chemistry, sizes and stock details sit on our dedicated Duplex 2205 fasteners page.
Metric sizes in millimetres
The table lists metric hex bolt across-corner, across-flat, body and head sizes in millimetres.
| Nominal Size (D) | Across Corners C (Max) | Across Corners C (Min) | Across Flats F (Max) | Across Flats F (Min) | Body Dia. D (Max) | Body Dia. D (Min) | Head Thickness H (Max) | Head Thickness H (Min) |
|---|---|---|---|---|---|---|---|---|
| M10 | 18.48 | 17.77 | 17.00 | 15.73 | 10.00 | 9.78 | 6.63 | 6.17 |
| M12 | 20.78 | 20.03 | 19.00 | 17.73 | 12.00 | 11.73 | 7.76 | 7.24 |
| M14 | 24.25 | 23.35 | 22.00 | 20.67 | 14.00 | 13.73 | 9.09 | 8.51 |
| M16 | 27.71 | 26.75 | 24.00 | 23.67 | 16.00 | 15.73 | 10.32 | 9.68 |
| M20 | 34.64 | 32.95 | 30.00 | 29.16 | 20.00 | 19.67 | 12.88 | 12.12 |
| M24 | 41.57 | 39.55 | 36.00 | 35.00 | 24.00 | 23.67 | 15.44 | 14.56 |
| M30 | 53.12 | 50.85 | 46.00 | 45.00 | 30.00 | 29.67 | 19.48 | 17.92 |
| M36 | 63.51 | 60.79 | 55.00 | 53.80 | 36.00 | 35.61 | 23.38 | 21.63 |
| M42 | 75.06 | 71.71 | 65.00 | 62.90 | 42.00 | 41.38 | 26.97 | 25.03 |
| M48 | 86.60 | 82.76 | 75.00 | 72.60 | 48.00 | 47.38 | 31.07 | 28.93 |
| M56 | 98.15 | 93.71 | 85.00 | 82.20 | 56.00 | 55.26 | 36.20 | 33.80 |
| M64 | 109.70 | 104.65 | 95.00 | 91.80 | 64.00 | 63.26 | 41.32 | 38.68 |
| M72 | 121.24 | 115.60 | 105.00 | 101.40 | 72.00 | 71.26 | 46.45 | 43.55 |
| M80 | 132.72 | 126.54 | 115.00 | 111.00 | 80.00 | 79.26 | 51.58 | 48.42 |
| M90 | 150.11 | 143.07 | 130.00 | 125.50 | 90.00 | 89.13 | 57.74 | 54.26 |
| M100 | 167.43 | 159.60 | 145.00 | 140.00 | 100.00 | 99.13 | 63.90 | 60.10 |
Stud and rod patterns
Studs and threaded rods are cut or rolled in metric coarse, metric fine and UNC/UNF.
Traceable, heat-numbered stock
We stock bolts, nuts, studs and washers as a working duplex fasteners manufacturer in India.


















Standard patterns and made-to-order styles
As a duplex stainless steel fasteners manufacturer, we also build full flange kits and specials. Duplex stainless steel bolts and nuts below are machined from UNS S31803 / S32205 bar. Overseas buyers rely on us as a duplex fasteners supplier in India for mixed lists.
Duplex steel nuts ship paired with the bolt heat, so the MTC covers the assembly.
Duplex Fasteners Manufacturer In Mumbai With A Khetwadi Machine Shop Running Since 2021
Share a drawing or size list and our shop confirms grade, quantity and dispatch date.
Head shapes, thread pitches
Choose a screw head shape and thread pitch based on clearance, driving tool and vibration.
ASTM A276 annealed minimums
| Property | UNS S31803 | UNS S32205 |
|---|---|---|
| Tensile Strength, min | 620 MPa (90 ksi) | 655 MPa (95 ksi) |
| 0.2% Yield Strength, min | 448 MPa (65 ksi) | 450 MPa (65 ksi) |
| Elongation in 50 mm, min | 25% | 25% |
| Brinell Hardness, max | 290 HB | 290 HB |
Tests run to ASTM A370 on same-heat bar, with results printed on the certificate.
Smaller bolt, same load
Yield load equals the minimum 0.2% yield times thread stress area (ISO 898-1 values). Bar minimums follow ASTM A276 Condition A: 316 at 205 MPa, S31803 at 448 MPa.
Against cold-worked A4-70 bolts the gap narrows, so confirm sizing with your joint calculation.
Duplex screws 2 3 4 resist chloride stress-corrosion cracking better than 316 on offshore platforms.
PREN pitting resistance ranking
Figures are calculated from ASTM A276 minimum limits; actual heats score higher than these floors.
Tests on every lot
Working as a duplex fasteners manufacturer in India, we run these four checks per lot.
Verifies yield & tensile strength as per ASTM A370
ASTM · A370Brinell / Rockwell hardness verification of DSS bolts
HB · HRCSpectro analysis confirming grade elemental %
Spectro · AnalysisConfirms balanced austenite-ferrite phase ratio
NDT · FerritescopeASTM A276 / A1082 limits
| Element, % | UNS S31803 | UNS S32205 |
|---|---|---|
| Carbon (C) | 0.030 | 0.030 |
| Manganese (Mn) | 2.00 | 2.00 |
| Phosphorus (P) | 0.030 | 0.030 |
| Sulphur (S) | 0.020 | 0.020 |
| Silicon (Si) | 1.00 | 1.00 |
| Chromium (Cr) | 21.0–23.0 | 22.0–23.0 |
| Nickel (Ni) | 4.5–6.5 | 4.5–6.5 |
| Molybdenum (Mo) | 2.5–3.5 | 3.0–3.5 |
| Nitrogen (N) | 0.08–0.20 | 0.14–0.20 |
S32205 sits inside S31803 limits with higher Cr, Mo and N; dual certification is common.
Duplex Bolts & Nuts Stockist In Mumbai - Racked Sizes At Our 2021 Khetwadi Works
As a duplex fasteners stockist in Mumbai, we keep M12–M24 studs boxed for Gujarat pickups.
Records for H2S duty
Your project datasheet sets the H2S, chloride and hardness limits that we build to.
Per datasheetBrinell or Rockwell readings are logged per heat and printed on the lot certificate.
Per heatNo extra cold work is applied to the bar unless your specification clearly permits it.
Mill annealThe EN 10204 3.1 certificate carries a NACE MR0175 compliance statement when you order it.
On requestSame 22Cr duplex family
Duplex Steel Fasteners Exporter In India Shipping To Jebel Ali, UAE
Studs, bolts and heavy nuts share one container, with COO and MTC cleared before loading.
Duplex bolt torque by diameter
| Bolt Nominal Dia (in) | Threads per Inch (UNC / UNF) | Torque, Dry (ft-lb) | Torque, Lubricated (ft-lb) |
|---|---|---|---|
| 1/4" | 20 / 28 | 6.5 / 7.4 | 4.8 / 5.5 |
| 5/16" | 18 / 24 | 13.2 / 14.7 | 10.0 / 11.0 |
| 3/8" | 16 / 24 | 23.5 / 26.6 | 17.7 / 19.9 |
| 7/16" | 16 / 24 | 37.6 / 42.0 | 28.2 / 31.5 |
| 1/2" | 13 / 20 | 57.4 / 64.7 | 43.0 / 48.5 |
| 9/16" | 12 / 18 | 82.7 / 92.3 | 62.1 / 69.2 |
| 5/8" | 11 / 18 | 114.2 / 129.3 | 85.7 / 97.0 |
| 3/4" | 10 / 16 | 203 / 226 | 152 / 170 |
| 7/8" | 9 / 14 | 326 / 361 | 245 / 270 |
| 1" | 8 / 14 | 490 / 549 | 368 / 412 |
Values are indicative, so confirm final torque against your own joint design and lubricant.
Check both temperature ends
Duplex bolting works best within a set temperature band, so check both ends before specifying.
Minimum 0.2% proof by temperature
| Temperature (°C) | Min. 0.2% Proof Strength (MPa) |
|---|---|
| 20 | 450 |
| 100 | 360 |
| 150 | 335 |
| 200 | 315 |
| 250 | 300 |
Values are EN 10088-3 minimum proof strengths for 1.4462 bar; confirm design stresses with ASME.
2205 versus 2507
Compare duplex and super duplex side by side to see which grade your service needs.
Six controlled steps
Our six stages show how a duplex fasteners manufacturer in India turns bar into bolts.
Raw Material Selection
Billets checked for chemistry
Hot Forging
Forged to near shape
Solution Annealing
Austenite-ferrite balance set
Thread Rolling / Machining
Precision threads
Surface Finishing
Passivation, plating or coating
Testing & Dispatch
Tensile, hardness and PMI test
Density-based weight factors
Duplex bolt weight depends on size, length and head style, so we quote exact figures.
Hex, nylock, jam nuts
Use this chart to match hex, nylock and jam nut sizes to your bolt diameter.
| Across Flats (mm) | Thread Size | Hex Nut Height (mm) | Nylock Nut Height (mm) | Jam Nut Height (mm) |
|---|---|---|---|---|
| 4 | M2 | 1.6 | - | 1.2 |
| 5 | M2.5 | 2 | - | 1.6 |
| 5.5 | M3 | 2.4 | 4 | 1.8 |
| 7 | M4 | 3.2 | 5 | 2.2 |
| 8 | M5 | 4 | 5 | 2.7 |
| 10 | M6 | 5 | 6 | 3.2 |
| 11 | M7 | 5.5 | - | 3.5 |
| 13 | M8 | 6.5 | 8 | 4 |
| 17 | M10 | 8 | 10 | 5 |
| 19 | M12 | 10 | 12 | 6 |
| 22 | M14 | 11 | 14 | 7 |
| 24 | M16 | 13 | 16 | 8 |
| 27 | M18 | 15 | 18.5 | 9 |
| 30 | M20 | 16 | 20 | 10 |
Metric sizes in millimetres
| Size | Thread Pitch | Head Dia. (max) | Head Height (max) | Hex Socket Size |
|---|---|---|---|---|
| M3 | 0.5 | 5.5 | 3 | 2.5 |
| M4 | 0.7 | 7 | 4 | 3 |
| M5 | 0.8 | 8.5 | 5 | 4 |
| M6 | 1.0 | 10 | 6 | 5 |
| M8 | 1.25 | 13 | 8 | 6 |
| M10 | 1.5 | 16 | 10 | 8 |
| M12 | 1.75 | 18 | 12 | 10 |
| M16 | 2.0 | 24 | 16 | 14 |
| M20 | 2.5 | 30 | 20 | 17 |
| M24 | 3.0 | 36 | 24 | 19 |
Dimensions follow ISO 4762 / DIN 912; duplex cap screws are machined or hot forged.
Surface treatments offered
Pick a surface finish based on your environment, galling risk and required corrosion protection.
Five-step length calculation
Follow these five simple steps to work out the right threaded rod length for flanges.
Add Flange Thickness
Sum both mating flange thicknesses
Add Gasket Thickness
Include compressed gasket dimension
Add Two Nut Heights
Both duplex nuts fully engaged on thread
Add Nut Runout Allowance
One to two thread pitches per end
Round to Standard Length
Round up to nearest 5mm or 10mm
Weight per metre and minimum loads, metric coarse
| Size | Pitch (mm) | Approx. Weight (kg/m) | Stress Area (mm²) | Min. Tensile Load (kN) | Min. 0.2% Yield Load (kN) |
|---|---|---|---|---|---|
| M12 | 1.75 | 0.72 | 84.3 | 52.3 | 37.9 |
| M16 | 2.0 | 1.32 | 157 | 97.3 | 70.7 |
| M20 | 2.5 | 2.07 | 245 | 151.9 | 110.2 |
| M24 | 3.0 | 2.98 | 353 | 218.9 | 158.8 |
| M30 | 3.5 | 4.71 | 561 | 347.8 | 252.4 |
| M36 | 4.0 | 6.83 | 817 | 506.5 | 367.6 |
| M42 | 4.5 | 9.35 | 1121 | 695.0 | 504.4 |
| M48 | 5.0 | 12.27 | 1473 | 913.3 | 662.9 |
Loads use 620 MPa tensile and 450 MPa yield minimums for annealed duplex rod. As a duplex fasteners stockist in India, we hold annealed and cold drawn threaded rod.
ASME B16.5 Class 150, inch units
| NPS | Flange OD (in) | Bolt Circle (in) | No. of Studs | Stud Dia. (in) | Stud Length RF (in) |
|---|---|---|---|---|---|
| 1/2 | 3.50 | 2.38 | 4 | 1/2 | 2.25 |
| 3/4 | 3.88 | 2.75 | 4 | 1/2 | 2.50 |
| 1 | 4.25 | 3.12 | 4 | 1/2 | 2.50 |
| 1 1/4 | 4.62 | 3.50 | 4 | 1/2 | 2.75 |
| 1 1/2 | 5.00 | 3.88 | 4 | 1/2 | 2.75 |
| 2 | 6.00 | 4.75 | 4 | 5/8 | 3.25 |
| 2 1/2 | 7.00 | 5.50 | 4 | 5/8 | 3.50 |
| 3 | 7.50 | 6.00 | 4 | 5/8 | 3.50 |
| 3 1/2 | 8.50 | 7.00 | 8 | 5/8 | 3.50 |
| 4 | 9.00 | 7.50 | 8 | 5/8 | 3.50 |
| 5 | 10.00 | 8.50 | 8 | 3/4 | 3.75 |
| 6 | 11.00 | 9.50 | 8 | 3/4 | 4.00 |
| 8 | 13.50 | 11.75 | 8 | 3/4 | 4.25 |
| 10 | 16.00 | 14.25 | 12 | 7/8 | 4.50 |
| 12 | 19.00 | 17.00 | 12 | 7/8 | 4.75 |
| 14 | 21.00 | 18.75 | 12 | 1 | 5.25 |
| 16 | 23.50 | 21.25 | 16 | 1 | 5.25 |
| 18 | 25.00 | 22.75 | 16 | 1 1/8 | 5.75 |
| 20 | 27.50 | 25.00 | 20 | 1 1/8 | 6.25 |
| 24 | 32.00 | 29.50 | 20 | 1 1/4 | 6.75 |
Stud lengths suit raised-face ASME B16.5 Class 150 flanges with two heavy hex nuts.
Chloride and high-load sectors
Offshore and desalination buyers pick a duplex fasteners manufacturer in India for chloride-heavy joints.
Bar cost, diameter, length, coating and testing set each rate; ask for our stock-size catalogue. As a duplex fasteners supplier in Mumbai, we price lots by bar cost and size.
Get Today's Duplex RateCustoms codes, export documents
Buyers dealing with a duplex fasteners manufacturer in India need correct HS codes and papers.
Timelines after written confirmation
Boxed stock sizes leave the works within the week; drawing specials get their own date.
As a duplex fasteners exporter, we sail containers from Nhava Sheva weekly to your port.
Short-notice studs and nuts fly from Mumbai airport with airway bills shared at uplift.
Gulf ports arrive first, East and South Africa come next, and Canadian ports take longest.
Ocean timings stay estimates until the carrier confirms a sailing, even on repeat duplex orders.
One document pack worldwide
ASTM A1082 DSS Bolting Supplier In Dammam With NACE Hardness Records On File
Saudi contractors receive heat-marked cartons with certificates matched line by line to the packing list.
Annealed duplex bar yields at 65 ksi minimum, against 30 ksi for annealed 316 bar.
Our standard duplex range covers UNS S31803 and S32205; super duplex grades have separate pages.
Mostly yes, since S32205 sits inside S31803 limits with higher Cr, Mo and N.
Yes, the ferrite phase makes duplex fasteners magnetic, unlike annealed 304 or 316 fasteners.
ASME caps design at 316°C (600°F) because of 475°C embrittlement; many users stay lower.
Yes, hardness is recorded per heat and the MTC carries a NACE statement on request.
Price follows bar cost, diameter, length, head style, coating and testing; send your list.
Bolts and screws ship under HS 7318.15, nuts under 7318.16 and washers under 7318.22.
It suits seawater, desalination, offshore and chemical plant joints where 316 bolts pit or crack.
Yes, studs, heavy nuts and washers are counted per flange and packed under one heat.