-
Call
+91 9930108105
-
Email
-
Address
Sanghvi Galaxy, Shop No.2, Khetwadi
10th Lane, Mumbai-400004, India
Monel 400 Pipe Fittings
Table of Content
- ◍ Specification of monel 400 pipe fittings
- ◍ Size range of UNS N04400 buttweld fittings
- ◍ Types of monel 400 buttweld fittings
- ◍ Chemical composition of monel k500 reducer
- ◍ Equivalent grade of monel 400 tee
- ◍ Schedule chart of monel 400 pipe fittings
- ◍ Mechanical properties of Alloy 400 elbow
- ◍ Applications of monel 400 end cap
- ◍ Available services of monel K500 elbow
Know About UNS N04400 Elbow Tensile and Yield Strength, Check Specification
Specification of monel 400 pipe fittings
- Welded fittings : 24 – 96"
- Seamless fittings : 1/2 – 24"
- Fabricated fittings : custom
- Tensile strength: 550 MPa
- Yield strength: 345MPa
- Monel K500: 8.44 g/cm³
- Monel 400: 8.80 g/cm³
- Monel K500: Upto 1400-1600°F
- Monel 400: Upto 2150°F
- Monel 400: 1300 to 1350°C
- Monel K500: 1315 to 1350°C
- 25 to 35 years
- Monel K500: 63%
- Monel 400: 67%
- Monel 400: 25-34%
- Monel K500: 27-33%
- Compound Bevel
- Plain Bevel
- Bevelled
- NACE MR0103
- NACE MR0175
- Sour service
- IBR
- NACE TM-0284
- ISO 15156
- NORSOK
- HIC tested
- Stub end
- Elbow
- Reducer
- Cross
- Pipe bend
- Alloy cap
- Tee
- MSS-SP-43
- MSS-SP-95
- ANSI / ASME B16.9
- MSS-SP 119
- MSS-SP-83
- ANSI/ ASME B16.28
- ANSI/ ASME B16.25
- Welded fittings: ASTM B366
- Seamless fittings: ASTM B366
- Roll Bending
- Mandrel Bending
- Rotary Draw Bending
- Hot Induction Bending
- Ram-Type Bending
- Mandrel
- Hot forming
- Ultrasonic test
- HIC tested
- Hyrdrostatic test
- Positive Material Identification
- EN 10253-2
- SCH 20
- STD
- XXH
- SCH 40
- XH
- SCH 10
- SCH 80
- SCH 160
- SCH 60
- 180°
- 135°
- 22.5
- 30°
- 90°
- 45°
- 15°
- 60°
- 8D
- 5D
- 6D
- 10D
- 4D
- 3D
- Steam
- Oil
- Air
- Water
- Gas
- DIN 2605-1 (Elbow)
- DIN 2616-2 (Concentric Reducer)
- DIN 2605-2 (Elbow)
- DIN 2618 (saddle)
- DIN 2615-2 (Tee)
- DIN 28011 (Torispherical heads)
- DIN 2616-1 (Eccentric Reducer)
- DIN 2617 (Caps)
- DIN 2615-1 (Tee)
- JIS B2313
- JIS B2312
- Grade
- Dimensional standard – ASME B16.9
- Size
- Heat number
- GOST 17378
- GOST 17375
- GOST 17379
- GOST 17375
- GOST 17376
- Carton Box
- Wooden Cases
- Wooden Pallet
- Custom as per buyer choice
Manufacturer of Alloy 400 Buttweld Fittings in Size Ranging From 1/2" NB to 24" NB, Check Size Chart
Size range of UNS N04400 buttweld fittings
| Forms | Size Range | |
|---|---|---|
| Monel 400 45° elbow | Monel alloy 400 reducer | Sizes 1/8" to 4" Pressure class: 2000 LBS, 6000 LBS, 3000 LBS, 9000 LBS |
| Alloy 400 90° elbow | Monel 400 coupling | |
| ASTM B366 UNS N04400 elbow | ASTM B366 N04400 insert | |
| Monel 400 cross | 2.4360 monel 400 union | |
| Nickel alloy 400 tee | Monel 400 cap | |
Types of Monel 400 Pipe Fittings
Alloy 400 elbow
DIN 2.4360 Pipe Bend
Monel 400 tee
Monel K500 fitting
Check ASTM B366 Seamless Pipe Fittings Chemical Composition and Equivalent Properties
Chemical composition of monel k500 reducer
| Grade | Mn | Ni | C | S | Cu | Fe | Si | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|
| Monel 400 | 2.0 max | 63.0 min | 0.3 max | 0.02 max | 28.0 – 34.0 | 1.0 – 2.5 | 0.5 max | 0.50 max | - |
Equivalent grade of monel 400 tee
| STANDARD | UNS | EN | GOST | AFNOR | BS | WERKSTOFF NR. | JIS |
|---|---|---|---|---|---|---|---|
| Monel 400 | N04400 | NiCu30Fe | МНЖМц 28-2,5-1,5 | NU-30M | NA 13 | 2.4360 | NW 4400 |
WNR 2.4360 Tee in SCH 5 TO SCH XXS schedules, Check Schedule Chart
Schedule chart of monel 400 pipe fittings
| DN (Normal Pipe Size) For ASME B16.9 | Schedule 10S | Schedule 80S | Schedule 40S | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Elbow 45 Deg | Elbow 90 Deg | Elbow 90 Deg | B16.9 Equal Tee | Elbow 45 Deg | B16.9 Equal Tee | Elbow 45 Deg | |||
| 15 | 0.03 | 0.06 | 0.10 | 0.14 | 0.05 | 0.10 | 0.04 | ||
| 20 | 0.03 | 0.07 | 0.11 | 0.20 | 0.05 | 0.17 | 0.04 | ||
| 65 | 0.48 | 0.85 | 1.81 | 3.13 | 0.99 | 2.19 | 0.77 | ||
| 8 | 0.01 | 0.02 | 0.04 | 0.07 | 0.03 | 0.06 | 0.02 | ||
| 32 | 0.11 | 0.23 | 0.40 | 0.68 | 0.23 | 0.59 | 0.17 | ||
| 40 | 0.17 | 0.30 | 0.51 | 1.02 | 0.29 | 0.86 | 0.23 | ||
| 10 | 0.02 | 0.03 | 0.06 | 0.09 | 0.04 | 0.03 | 0.02 | ||
| 25 | 0.08 | 0.14 | 0.22 | 0.38 | 0.14 | 0.29 | 0.11 | ||
| 80 | 0.63 | 1.25 | 2.97 | 4.45 | 1.50 | 3.31 | 1.08 | ||
| 50 | 0.25 | 0.50 | 0.91 | 1.59 | 0.59 | 1.28 | 0.4 | ||
Mechanical properties of Alloy 400 elbow
| Element | Yield strength(0.2%Offset) | Density | Elongation | Tensile strength | Melting point |
|---|---|---|---|---|---|
| Monel 400 | Psi-35000, MPa-240 | 8.8g/cm3 | 40% | Psi–80000, MPa–550 | 1350°C(2460°F) |
Find HIC tested Monel K500 Reducer at Low Cost as Per ASME B16.9 Standard, Check Applications
Applications of monel 400 end cap
- → Marine industry
- → Pumps
- → Heat exchangers
- → Chemical processing
- → Valves
- → Hydro-carbon processing
Available services of monel K500 elbow
- Cladding
- Annealed
- Heat treatment
- Rolling
- Pickling / polish
- Bending
- Cutting
- Minor fabrication
- Forging.