Call
+91 9930108105
Address
Sanghvi Galaxy, Shop No.2, Khetwadi
10th Lane, Mumbai-400004, India
Molybdenum reading kept for every incoming coil.
Alloy analyser screens each lot before heading.
Flange-duty heads matched to heavy hex nuts.
UNC, UNF and ISO pitches from one shop.
Poly-sealed cartons for humid sea voyages.
Established 2021
Mumbai fastener works
ISO 9001:2015
Audited quality management
GST Registered
Tax-compliant invoicing
Udyam (MSME)
Registered small enterprise
Import-Export Code
DGFT IEC for export filing
Own Fastener Shop
Heading, rolling & testing in-house
Pan-India Delivery
Road courier to every state
Flexible Payments
Choice of settlement modes
If your bolts face salt air or wash-down water, Stainless Steel 316 Bolts are the safer pick. They carry 2–3% molybdenum, so they hold up against rust spots much better than 304. We make SS 316 bolts and nuts, screws and U bolts in our Mumbai workshop. Orders follow ASTM A193, ASTM F593 or ISO 3506-1, whichever standard your drawing calls for. As a Stainless Steel 316 Bolts Supplier in India, we ship matched bolt and nut sets. Every bolt gets a grade stamp that links back to its heat number and certificate. Stainless steel 316 fasteners like hex bolts, studs, rod, nuts and washers ship together. We also source concrete screws, toggle bolts and 316 Tek screws to complete your kit. Buyers in Jeddah, Durban and Vancouver get export papers ready before the ship leaves port. Orders for Chennai, Rajkot or Nagpur travel by road and arrive within a few days.















Stainless Steel 316 Bolts Manufacturer In Mumbai – Own Heading Line Running Since 2021
Need a Stainless Steel 316 Bolts Supplier in Mumbai? Send your size list for same-day rates.
| Standard & Class | Diameter Band | Tensile Strength | Yield / 0.2% Stress, min | Elongation, min | Hardness, max |
|---|---|---|---|---|---|
| ASTM A193 B8M, Class 1 | All diameters | 75 ksi (515 MPa) | 30 ksi (205 MPa) | 30% | 223 HBW / 96 HRB |
| ASTM A193 B8M, Class 2 | 3/4" and under | 110 ksi | 95 ksi | 15% | 321 HBW / 35 HRC |
| ASTM A193 B8M, Class 2 | Over 3/4" to 1" | 100 ksi | 80 ksi | 20% | 321 HBW / 35 HRC |
| ASTM A193 B8M, Class 2 | Over 1" to 1-1/4" | 95 ksi | 65 ksi | 25% | 321 HBW / 35 HRC |
| ASTM A193 B8M, Class 2 | Over 1-1/4" to 1-1/2" | 90 ksi | 50 ksi | 30% | 321 HBW / 35 HRC |
| ASTM F593 Group 2, CW1 | 1/4" to 5/8" | 100–150 ksi | 65 ksi | — | — |
| ASTM F593 Group 2, CW2 | 3/4" to 1-1/2" | 85–140 ksi | 45 ksi | — | — |
| ISO 3506-1 A4-50 | Metric | 500 MPa | 210 MPa | 0.6d | — |
| ISO 3506-1 A4-70 | Metric | 700 MPa | 450 MPa | 0.4d | — |
| ISO 3506-1 A4-80 | Metric | 800 MPa | 600 MPa | 0.3d | — |
A193 values use inch units; F593 tensile shows min–max range; d is nominal diameter.
Density
Elastic Modulus
Thermal Expansion, 0–100 °C
Thermal Conductivity, 100 °C
Specific Heat, 0–100 °C
316 Stainless Bolts Stockist In Mumbai With Shelf-Ready Sizes Since 2021
Being a Stainless Steel 316 Bolts Stockist in Mumbai, we box sizes for same-week Pune pickups.
316 Stainless Steel Fasteners Exporter in India Serving Jebel Ali, UAE
We work as a Stainless Steel 316 Bolts Exporter, shipping mixed pallets under one certificate set.
Can 316 bolts fix aluminium sheet?
Yes – small bolt, large sheet
Why does metal near the bolt pit?
Water trapped at the head
How do I isolate the joint?
EPDM, neoprene or nylon washers
Can aluminium screws hold stainless sheet?
Avoid – they corrode fast
What about galvanised steel members?
Isolate in wet or coastal sites
Are carbon steel washers acceptable?
No – they rust and stain
| Thread | Coarse Pitch (mm) | Fine Pitch (mm) | AF, ISO 4014/4017 (mm) | AF, DIN 931/933 (mm) | Head Height k, nominal (mm) |
|---|---|---|---|---|---|
| M6 | 1.0 | — | 10 | 10 | 4 |
| M8 | 1.25 | 1.0 | 13 | 13 | 5.3 |
| M10 | 1.5 | 1.25 / 1.0 | 16 | 17 | 6.4 |
| M12 | 1.75 | 1.5 / 1.25 | 18 | 19 | 7.5 |
| M14 | 2.0 | 1.5 | 21 | 22 | 8.8 |
| M16 | 2.0 | 1.5 | 24 | 24 | 10 |
| M20 | 2.5 | 1.5 | 30 | 30 | 12.5 |
| M24 | 3.0 | 2.0 | 36 | 36 | 15 |
| M30 | 3.5 | 2.0 | 46 | 46 | 18.7 |
| M36 | 4.0 | 3.0 | 55 | 55 | 22.5 |
AF means width across flats; inch bolts are also supplied in these UNC sizes below.
ASTM A193 & F593 Bolting Supplier in Toronto With Heat-Traceable MTCs
As a Stainless Steel 316 Fasteners Exporter, we heat-label every carton bound for Canada.
| UNC Size | Threads Per Inch | Dry Torque, 316 (in-lb) | Dry Torque, 316 (N·m) |
|---|---|---|---|
| 1/4" | 20 | 78.8 | 8.9 |
| 5/16" | 18 | 138 | 15.6 |
| 3/8" | 16 | 247 | 27.9 |
| 7/16" | 14 | 393 | 44.4 |
| 1/2" | 13 | 542 | 61.2 |
| 9/16" | 12 | 713 | 80.6 |
| 5/8" | 11 | 1,160 | 131.1 |
| 3/4" | 10 | 1,582 | 178.7 |
| 7/8" | 9 | 2,430 | 274.6 |
Values are dry maximums from published 316 charts; confirm them against your own joint design.
Boxed 316 Fastener Stock Held For Plant Shutdown Orders
Working as a Stainless Steel 316 Fasteners Stockist in India, we shelve shutdown spares year-round.
Rates from a Stainless Steel 316 Bolts Stockist in India depend on nickel, size and testing scope.
Ask For Today's RateHeaded batches: 10–15 days
Weekly Nhava Sheva sailings
For urgent shutdown spares
East Africa next, Canada longest
Local 316 Fastener Orders Trucked Straight From Our Mumbai Workshop
Local buyers trust us as a Stainless Steel 316 Fasteners Supplier in Mumbai for top-ups.
Annealed 316 shows negligible magnetism, though cold heading can add a slight magnetic response.
316 adds 2–3% molybdenum and more nickel, giving better chloride pitting resistance than 304.
It depends on class: A193 Class 1 needs 75 ksi, ISO A4-80 needs 800 MPa.
Use A194 grade 8M for A193, F594 Group 2 for F593, ISO 3506-2 for metric.
They suit marine air well, but immersed low-flow seawater can cause crevice corrosion under heads.
Bolts and screws fall under 7318.15, nuts under 7318.16, and flat washers under 7318.22.
Nickel and molybdenum surcharges, diameter, length, head style and test scope set each quote.
Use the dry chart above for inch sizes, and reduce values when anti-seize is applied.
Metric M6 to M36 and inch 1/4 to 1-1/2 inch, plus custom lengths on request.
Yes, DIN 975 and DIN 976 rod is cut to your stud length on order.
Yes, 316L (UNS S31603) with 0.03% max carbon is available for welded assemblies on request.
Yes, B8M studs with 8M nuts are common on process piping flanges and valves.
Yes, we operate as a Stainless Steel 316 Fasteners Stockist in Mumbai with boxed sizes.
Yes, being a Stainless Steel 316 Fasteners Supplier in India, we road-ship to every state.