Call
+91 9930108105
Address
Sanghvi Galaxy, Shop No.2, Khetwadi
10th Lane, Mumbai-400004, India
Every sample checked, not only the ingot.
Ultrasonic or eddy current on every tube.
Welded tube fused without added wire.
Marked on lengths from 1/2″ OD up.
U-bends, coils and exhaust radii supplied.
Buyers comparing quotes choose us as a Titanium Tube Manufacturer in India for traceable lots.
Founded In 2021
Trading desk at Khetwadi, Mumbai
ISO 9001:2015
Audited quality management
GST & Udyam
Registered MSME supplier
DGFT IEC Holder
Cleared to ship direct overseas
Tube Value-Add
Cut, bent and coiled lengths
Pan-India Freight
Road, air and courier bookings
Titanium tube pays off where seawater, chlorides or acid fumes destroy steel and copper alloys. A self-healing oxide film protects the bore, and pure grades weigh only 4.51 g/cm³. We supply seamless, welded and welded-cold-worked lengths made to ASTM B338 and ASME SB338. Pure grades suit most condensers, while palladium and molybdenum-nickel grades handle harsher reducing media. Stronger 3Al-2.5V tubing serves hydraulic and instrument lines where every gram of weight counts.
Manifest Alloys runs a Khetwadi desk that cuts, bends and packs titanium tubing for sale worldwide. Every length leaves with heat-number marking and an EN 10204 3.1 certificate tied to that lot. Buyers comparing titanium tube manufacturers in India get one quote covering material, cutting and freight. Fabricators who buy titanium tubing in small lots receive the same paperwork as project buyers. Plants across Maharashtra call our Khetwadi desk as their trusted Titanium Tube Supplier in Mumbai.
Details an inspector checks after grade and size are already confirmed on the purchase order.
Each profile ships annealed, marked by heat number and backed by its own mill certificate.















Titanium Tube Manufacturer In Mumbai – Khetwadi Desk Running Since 2021
Send OD, wall, grade and length; one reply confirms stock, cutting and dispatch date.
Both routes meet ASTM B338; welded-cold-worked tube is even certified to seamless requirements.
Room-temperature minimums from ASTM B338 Table 3; the Ti-6Al-4V row follows ASTM B861 pipe values.
| Grade | Condition | Tensile Min, MPa (ksi) | 0.2% Yield, MPa (ksi) | Elongation Min, % |
|---|---|---|---|---|
| Grade 1 | Annealed | 240 (35) | 138–310 (20–45) | 24 |
| Grade 2 | Annealed | 345 (50) | 275–450 (40–65) | 20 |
| Grade 2H | Annealed | 400 (58) | 275–450 (40–65) | 20 |
| Grade 3 | Annealed | 450 (65) | 380–550 (55–80) | 18 |
| Grade 7 | Annealed | 345 (50) | 275–450 (40–65) | 20 |
| Grade 11 | Annealed | 240 (35) | 138–310 (20–45) | 24 |
| Grade 9 | Annealed | 620 (90) | 483 (70) min | 15* |
| Grade 9 | Cold Worked & Stress Relieved | 860 (125) | 725 (105) min | 10 |
| Grade 12 | Annealed | 483 (70) | 345 (50) min | 18* |
| Grade 5 (ASTM B861) | Per B861 | 895 (130) | 828 (120) min | 10 |
*Welded tube made from continuously cold-rolled, annealed coil strip carries a 12% elongation minimum instead.
Titanium tubing sizes follow BWG gauge, so always state wall thickness and OD together.
Gauge, impulse and analyser runs.
Surface condenser and cooler retubes.
Shell-and-tube process exchangers.
Mid-pipes, frames and handrails.
Collectors, links and bent sections.
Brine, acid and seawater lines.
BWG to mm: 22 = 0.711 · 20 = 0.889 · 18 = 1.245 · 16 = 1.651 · 14 = 2.108 · 10 = 3.404.
Pick a band, then send OD, wall and length for a firm titanium tube quote.
Wall in mm
Seamless, CWSR or annealed
Compression-fitting ready
Weight-percent limits from ASTM B338 Table 1; the Ti-6Al-4V column follows ASTM B861 values.
| Element | Grade 1 | Grade 2 | Grade 3 | Grade 7 | Grade 11 | Grade 9 | Grade 12 | Grade 5 |
|---|---|---|---|---|---|---|---|---|
| Nitrogen, max | 0.03 | 0.03 | 0.05 | 0.03 | 0.03 | 0.03 | 0.03 | 0.05 |
| Carbon, max | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 | 0.08 |
| Hydrogen, max | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 | 0.015 |
| Iron, max | 0.20 | 0.30 | 0.30 | 0.30 | 0.20 | 0.25 | 0.30 | 0.40 |
| Oxygen, max | 0.18 | 0.25 | 0.35 | 0.25 | 0.18 | 0.15 | 0.25 | 0.20 |
| Aluminium | – | – | – | – | – | 2.5–3.5 | – | 5.5–6.75 |
| Vanadium | – | – | – | – | – | 2.0–3.0 | – | 3.5–4.5 |
| Palladium | – | – | – | 0.12–0.25 | 0.12–0.25 | – | – | – |
| Molybdenum | – | – | – | – | – | – | 0.2–0.4 | – |
| Nickel | – | – | – | – | – | – | 0.6–0.9 | – |
| Residuals, each / total | 0.1 / 0.4 | 0.1 / 0.4 | 0.1 / 0.4 | 0.1 / 0.4 | 0.1 / 0.4 | 0.1 / 0.4 | 0.1 / 0.4 | 0.1 / 0.4 |
| Titanium | Balance | Balance | Balance | Balance | Balance | Balance | Balance | Balance |
Hydrogen is a final product analysis; lower hydrogen limits can be negotiated for critical condenser service.
Enter round, square or rectangular dimensions to estimate kilos per metre before requesting a quote.
Round: kg/m = π × (OD − t) × t × density ÷ 1000 (mm); square and rectangular assume sharp corners.
| Round Tube OD | BWG 22 (0.711 mm) | BWG 20 (0.889 mm) | BWG 18 (1.245 mm) | BWG 16 (1.651 mm) | BWG 14 (2.108 mm) |
|---|---|---|---|---|---|
| 1/4″ (6.35 mm) | 0.057 | 0.069 | 0.090 | 0.110 | 0.127 |
| 3/8″ (9.53 mm) | 0.089 | 0.109 | 0.146 | 0.184 | 0.222 |
| 1/2″ (12.70 mm) | 0.121 | 0.149 | 0.202 | 0.258 | 0.316 |
| 5/8″ (15.88 mm) | 0.153 | 0.189 | 0.258 | 0.333 | 0.411 |
| 3/4″ (19.05 mm) | 0.185 | 0.229 | 0.314 | 0.407 | 0.506 |
| 1″ (25.40 mm) | 0.249 | 0.309 | 0.426 | 0.556 | 0.696 |
| 1-1/4″ (31.75 mm) | 0.313 | 0.389 | 0.538 | 0.704 | 0.885 |
| 1-1/2″ (38.10 mm) | 0.377 | 0.469 | 0.650 | 0.853 | 1.075 |
| 1-3/4″ (44.45 mm) | 0.441 | 0.549 | 0.762 | 1.001 | 1.265 |
| 2″ (50.80 mm) | 0.505 | 0.629 | 0.874 | 1.150 | 1.454 |
| 2-1/2″ (63.50 mm) | 0.633 | 0.789 | 1.098 | 1.447 | 1.834 |
Theoretical kg/m for CP grades at 4.51 g/cm³; multiply by 0.993 for 3Al-2.5V or 0.982 for Ti-6Al-4V.
Ti Tubing Stockist In Mumbai – Straight Lengths Racked At Our 2021 Works
Being a Titanium Tube Stockist in Mumbai, we cut racked lengths within the same week.
Name the code your drawing calls up and we match grade, product form and certificate.
Titanium springs back more than steel, so radius, tooling and argon shielding decide every bend.
TIG welding titanium tubing for exhausts needs argon on both faces until the bead cools below oxidising heat.
Titanium pays back where tube failures mean shutdowns, leaks or costly retubing every few years.
Mechanical tests run per sample lot, while nondestructive testing covers each finished length.
Tensile, yield and elongation.
Lot testNo cracks at set height.
Lot testWeld opened, flattened, crack-free.
Weld seam17–22% ID expansion, CP grades.
60° flare toolNotched standards, ID and OD.
Seamless & weldedDrilled-hole calibration, 0.787 mm max.
Each welded lengthHydro at 50% yield, or 0.69 MPa air.
5 s minimum holdWelded tube: one per strip coil.
0.015% maxSampling runs one test set per 1600 m of tube; hydrostatic pressure caps at 17.2 MPa up to 76 mm OD.
Welded tube can take a helium leak test to ASTM E499 instead of pneumatic, limit 1×10−3 mbar·l/s.
Working pressure in psig for annealed CP tube; ask us for alloy-grade ratings.
| OD | .028″ | .035″ | .049″ | .065″ | .083″ | .095″ | .109″ | .120″ |
|---|---|---|---|---|---|---|---|---|
| 1/8″ | 7,900 | 10,100 | – | – | – | – | – | – |
| 1/4″ | 3,700 | 4,800 | 7,000 | 9,500 | – | – | – | – |
| 5/16″ | – | 3,700 | 5,400 | 7,300 | – | – | – | – |
| 3/8″ | – | 3,100 | 4,400 | 6,100 | – | – | – | – |
| 1/2″ | – | 2,300 | 3,200 | 4,400 | – | – | – | – |
| 3/4″ | – | – | 2,200 | 3,000 | 4,000 | 4,600 | – | – |
| 1″ | – | – | – | 2,200 | 2,900 | 3,400 | 3,900 | 4,300 |
Wall thickness in inches across the top; dashes mean the combination is not normally drawn.
Titanium Bright Annealed Tube follows the same Ra limits as mechanical polish.
| Finish | Inside Ra, µin (µm) | Outside Ra, µin (µm) |
|---|---|---|
| MP – Mechanical Polish | 40, 32, 25, 20 (1.0, 0.8, 0.6, 0.5) | 32 (0.8) |
| EP – Electropolish | 15, 10, 7, 5 (0.38, 0.25, 0.20, 0.13) | 32 (0.8) |
| BA – Bright Annealed | 40, 32, 25, 20 (1.0, 0.8, 0.6, 0.5) | 32 (0.8) |
| AP – Annealed & Pickled | Not defined | 40 (1.0) or not defined |
Minimum inside-diameter expansion before cracking, by grade, on a 60° flare tool.
| Grade | 1 | 2 / 2H | 3 | 7 / 7H | 9 | 11 | 12 |
|---|---|---|---|---|---|---|---|
| Min ID expansion, % | 22 | 20 | 17 | 20 | 20 | 22 | 17 |
Ask for any grade below; Grade 7 and Grade 11 suit reducing acid service.
| Grade | UNS | Make-Up | Typical Use |
|---|---|---|---|
| Titanium Grade 1 Tube | R50250 | CP, softest | Deep forming and tight bends |
| Titanium Grade 2 Tube | R50400 | CP, standard | Condensers and exchangers |
| Titanium Grade 3 Tube | R50550 | CP, higher strength | Pressure lines |
| Titanium Grade 5 Tube | R56400 | Ti-6Al-4V | High-strength aerospace parts |
| Titanium Grade 7 Tube | R52400 | CP + 0.12–0.25% Pd | Reducing acids |
| Titanium Grade 9 Tube | R56320 | Ti-3Al-2.5V | Hydraulic and instrument lines |
| Titanium Grade 11 Tube | R52250 | CP + 0.12–0.25% Pd | Formable palladium grade |
| Titanium Grade 12 Tube | R53400 | Ti-0.3Mo-0.8Ni | Hot brine, crevice service |
Grade 1, 2 and 12 tube meets Table A.41 hardness limits for sour service.
| Item | Detail |
|---|---|
| Standard | NACE MR0175 / ISO 15156-3 |
| Risks Covered | SSC and SCC resistance |
| Service | Sour oil and gas service |
| Grades 1, 2 & 2H | UNS R50400, max 100 HRB |
| Grade 12 | Annealed, maximum hardness 92 HRB |
| Grades 3, 5, 7, 9, 11 | Not listed in Table A.41 |
| Hardness Report | Tested and shown on certificate |
| Galvanic Coupling | Isolate from steel above 80°C |
| Certificate | EN 10204 3.1 or 3.2 |
Grade, route, wall, length and tests set the titanium tube price; ask for price per foot too.
Ask For Today's RateSeamless Titanium Tube Exporter Serving Jebel Ali, UAE
As a Titanium Tube Exporter, we crate seamless and welded lots through Nhava Sheva port.
Timelines start from written order confirmation, not from the date of your first enquiry.
Racked lengths, cut to size.
Crated lots via Nhava Sheva.
Urgent retube lots flown out.
Gulf lanes land first.
As a Titanium Tube Stockist in India, we keep condenser sizes ready; sailing dates stay estimates.
As a Titanium Tube Supplier in India, we ship B338 lengths with EN 10204 certificates.
Plants in Perth and Melbourne rely on us as a Titanium Tube Supplier in Australia.
British fabricators book mixed-size consignments with us as their Titanium Tube Supplier in UK.
Marine yards in Auckland reorder heat-marked lengths from us, their Titanium Tube Supplier in NZ.
ASTM B338 Titanium Tubing Supplier In Toronto With Lot-Wise Hydrogen Results
Canadian fabricators receive heat-marked lengths whose hydrogen and tensile data share one certificate.
It depends on grade, process route, size and quantity, so share your list for today's rate.
No; B338 leaves that alloy out, so it is ordered to ASTM B861 seamless or B862 welded.
Condenser bundles commonly run BWG 16 to 22 walls, while instrument lines favour 1/4″ OD tubing.
Yes; motorcycle and car exhaust builders use it widely, provided every bend weld is argon-shielded properly.
Those are finished medical centrifuge tubes; our range covers industrial raw tubing, not certified medical devices.
Chemistry is identical, but 2H guarantees 400 MPa minimum tensile against 345 MPa for Grade 2.
Every length gets nondestructive testing, while tension, flattening and flaring tests run on each sample lot.
Each consignment carries an EN 10204 3.1 certificate, invoice, packing list and certificate of origin.
Yes; cold-drawn coil lengths and U-bends are cut and packed to your drawing.
Both are strip-formed welded routes; our welded tube is fused without filler to ASTM B338.
Ti-3Al-2.5V (Grade 9) is the usual choice, ordered to AMS 4943 annealed or AMS 4944 CWSR.
Walls run 0.25 to 3.40 mm, up to BWG 10, across 1.59 to 88.9 mm OD.
Strength is comparable to many steels, at roughly 40% less weight.